UPSC FOR BEGINNER

UPSC FOR BEGINNER - WHERE TO START

2009-06-12T07:55:00.000-07:00

UPSC For Beginner

Google Search

H
O
M
E

Now In
1 Welcome

Go To Page
4 Eligibility

Go To Page
5 OBC
Communities

Go To Page
6 IES
Syllabus

Go To Page
7 Calendar
of Exams

Go To Page
8 ECE
Questions

Go To Page
9 Appln
Form

Go To Page
10 Maths
Syllabus

Go To Page
11 Paper 2003 GS M1

Go To Page
12 Paper 2003 GS M2

Go To Page
13 PAPER 1997 GENERAL STUDIES MAIN-i

Go To Page
14 PAPER 1997 GENERAL STUDIES MAIN-II

Go To Page
15 PAPER 1998 GENERAL STUDIES MAIN-I

Go To Page
16 PAPER 1998 GENERAL STUDIES MAIN-II

UPSC For Beginner


	1-1 Jump Start

So you have finally decided to write UPSC exam and you want to know what is the syllabus and whether you are eligible to appear for the exam, which coaching centre is best, how many attempts are permitted,etc,etc,etc......


	1-2 : Choose ONE OUT OF FOUR : Syllabus

There are FOUR different syllabus You have to choose ONE among them.

1. Indian Civil Services Syllabus (IAS )

2. Indian Engineering Services ( IES)

3. Indian Forest Services Syllabus(IFS)

4. Indian Economic Service / Indian Statistical Service Syllabus(IES / ISS)


	1-3 : Watch for Civil Service Exam Notification

For Civil Service Exam ( ie. IAS, IPS, etc), Applications are called for during

November/December

Preliminary Exam will be conducted in May and Main exam will be after 5 months of Preliminary Exam.


	1-4 : Watch for Engg Service Notification

For Engg Service Exam, Apllications are called for in the month :

January/February.

Preliminary Exams will be conducted in May and Main exam will be in June/july


	1-4 : Eligibililty

Eligibility to write Civil Service :

Any degree such as BA,BSc,MA,MSc,BTech,BE,MBBS

Age : Between 21 to 30.

Eligibility to write Engineering Service(IES):

Any Engineering Degree (some of the MSc degree also eligible)

Age : Between 21 to 30.

For complete eligibility condition and age relaxation click on the ELIGIBILITY link given at the top of this page


	Where you will be posted?

Those who passed IES under Electronics and Telecom Engg Category will be posted in one of these:

(i) Indian Railway Service of Signal Engineers
(ii) Indian Railway Stores Service
(iii) Indian Ordnance Factories Service
(iv) Indian Naval Armament Service
(v) Assistant Executive Engineer (in Ministry of Defence)
(vi) Engineer in Wireless Planning and Coordination Wing/Monitoring Organisation
(vii) Assistant Naval Stores officer (in Indian Navy)
(viii) Survey of India Service


	1-5 : Mark Distribution for Civil Service

Civil Service (preliminary)

Paper - I ....150 marks.......General Studies
Paper - II ...300 marks..... One of the subjects from this list ;Agriculture, Mathematics, Animal Husbandry & Vetinary Science, Mechanical Engineering , Botany, Medical Science, Chemistry, Philosophy , Civil Engineering, Physics, Commerce, Political Science , Economics, Psychology, Electrical Engineering, Public Administration,
Geography, Sociology, Geology, Statistics, Indian History, Zoology , Law

CS (Main)

Paper-I....300 Marks.. One of the Indian Languages from this list:Arabic Gujarat,i Manipuri ,Sanskrit, Assamese, Hindi, Nepali ,Sindhi , Bengali ,Kannada, Oriya ,Tamil , Chinese, Kashmiri, Pali, Telugu , English, Konkani, Persian, Urdu , French, Marathi ,Punjabi, German, Malayalam,Russian ,

Paper-II ...300 Marks ..English
Paper-III...200 Marks ...Essay
Papers IV & V....600 marks.....General Studies

Papers VI, VII, VIII & IX ....1200 marks ....Any two subjects (each having 2 papers) from this list : Agriculture Management, Animal Husbandry & Vetinary Science, Mathematics , Anthropology, Mechanical Engineering , Botany, Medical Science,
Chemistr,y Philosophy, Civil Engineering, Physics, Commerce & Accountancy, Political Science & International Relations, Economics, Psychology , Electrical Engineering, Public Administration, Geography, Sociology, Geology ,Statistics , Indian History,Zoology , Law

Total Marks for Written Examination 2000 Marks
Interview Test 300 Marks
Grand Total 2300 Marks

Exam will be in October or November .


	Why dont you try Civil Service Instead of Engg Service?

Even though you are an Engineering Graduate, you are eligible for appearing CIVIL SERVICE also.

For an example, you can take

MATHS for IAS(prelim) and

MATHS&PHYSICS for IAS(Main).

I have given HERE a complete syllabus for UPSC > Civil Service > Maths

For syllabus and Marks Distribution for Engineering Service,

please CLICK HERE


	1-7 : UPSC FAQ

Some UPSC FAQ

Q1. What is the restriction on number of attempts in Commission’s Examinations?
Ans. Number of attempts :-
(1) Civil Service Examination - General-4, OBC-7, SC/ST- No restriction
(2) IFS Examination- General-4, OBC-7, SC/ST-No restriction
There is no restriction on number of attempts in any other Examination conducted by the Commission.

Q2. Can a candidate who has completed his education from an open school/ University apply for Commission’s Examination?
Ans. Yes, provided it is a recognized University and he possess the educational qualifications prescribed for the exam and is otherwise eligible.

Q3. Whether a candidate belonging to a community included in the OBC list of states but not in the Central list of OBCs is eligible for age relaxation, reservation etc. for Commission’s Examinations?
Ans. No. Only candidates belonging to communities which are included in the Central list of OBC’s are eligible for such concessions.

Civil Service Examination

Q.1. Can a candidate choose an optional subject, which he has not studied at graduate/PG level?
Ans. Yes.

Q.2. Is it necessary for a candidate to take the same optional subject in the Main Exam, which he had taken in the prelims Examination?
Ans. No.

Q.3. If a candidate has applied for the CS (P) Examination but has not appeared at any paper in the CS (P) Examination will it be counted as an attempt?
Ans. No. An attempt is counted only if a candidate has appeared in at least one paper in CS (P) Examination.

H
O
M
E

Now In
1 Welcome

Go To Page
4 Eligibility

Go To Page
5 OBC
Communities

Go To Page
6 IES
Syllabus

Go To Page
7 Calendar
of Exams

Go To Page
8 ECE
Questions

Go To Page
9 Appln
Form

Go To Page
10 Maths
Syllabus

Go To Page
11 Paper 2003 GS M1

Go To Page
12 Paper 2003 GS M2

Go To Page
13 PAPER 1997 GENERAL STUDIES MAIN-i

Go To Page
14 PAPER 1997 GENERAL STUDIES MAIN-II

Go To Page
15 PAPER 1998 GENERAL STUDIES MAIN-I

Go To Page
16 PAPER 1998 GENERAL STUDIES MAIN-II

Thank you For Your Visit
Main Menu...

Google Search

Disclaimer and Copyright

UPSC IAS MATHS SYLLABUS

2009-05-22T05:20:00.001-07:00

UPSC > Civil Service > MATHS Syllabus

Algebra: Elements of Set Theory; Algebra of Real and Complex numbers including Demovire's theorem; Polynomials and Polynomial equations, relation between Coefficients and Roots, symmetric functions of roots; Elements of Group Theory; Sub-Group, Cyclic groups, Permutation, Groups and their elementary properties. Rings, Integral Domains and Fields and their elementary properties.

Vector Spaces and Matrices: Vector Space, Linear Dependence and Independence. Sub-spaces. Basis and Dimensions, Finite Dimensional Vector Spaces. Linear Transformation of a Finite Dimensional Vector Space, Matrix Representation. Singular and Nonsingular Transformations. Rank and Nullity. Matrices : Addition, Multiplication, Determinants of a Matrix, Properties of Determinants of order, Inverse of a Matrix, Cramer's rule.

Geometry and Vectors: Analytic Geometry of straight lines and conics in Cartesian and Polar coordinates; Three Dimensional geometry for planes, straight lines, sphere, cone and cylinder. Addition, Subtraction and Products of Vectors and Simple applications to Geometry.

Calculus: Functions, Sequences, Series, Limits, Continuity, Derivatives. Application of Derivatives : Rates of change, Tangents, Normals, Maxima, Minima, Rolle's Theorem, Mean Value Theorems of Lagrange and Cauchy, Asymptotes, Curvature. Methods of finding indefinite integrals, Definite Integrals, Fundamental Theorem of integrals Calculus. Application of definite integrals to area, Length of a plane curve, Volume and Surfaces of revolution.

Ordinary Differential Equations: Order and Degree of a Differential Equation, First order differential Equations, Singular solution, Geometrical interpretation, Second order equations with constant coefficients.

Mechanics: Concepts of particles-Lamina; Rigid Body; Displacements; force; Mass; weight; Motion; Velocity; Speed; Acceleration; Parallelogram of forces; Parallelogram of velocity, acceleration; resultant; equilibrium of coplanar forces; Moments; Couples; Friction; Centre of mass, Gravity; Laws of motion; Motion of a particle in a straight line; simple Harmonic Motion; Motion under conservative forces; Motion under gravity; Projectile; Escape velocity; Motion of artificial satellites.

Elements of Computer Programming: Binary system, Octal and Hexadecimal systems. Conversion to and from Decimal systems. Codes, Bits, Bytes and Words. Memory of a computer, Arithmetic and Logical operations on numbers. Precisions. AND, OR, XOR, NOT and Shit/Rotate operators, Algorithms and Flow Charts.

Page-9 Specimen UPSC Application Form

2009-05-22T01:15:00.000-07:00

UPSC For Beginner

Google Search

H
O
M
E

Go To Page
1 Welcome

Go To Page
4 Eligibility

Go To Page
5 OBC
Communities

Go To Page
6 IES
Syllabus

Go To Page
7 Calendar
of Exams

Go To Page
8 ECE
Questions

Now In
9 Appln
Form

Sample Application Form for UPSC

Sample Application Form Page 1 of 3

UPSC Application Form page 2 of 3

UPSC Application Form page 3 of 3

H
O
M
E

Go To Page
1 Welcome

Go To Page
4 Eligibility

Go To Page
5 OBC
Communities

Go To Page
6 IES
Syllabus

Go To Page
7 Calendar
of Exams

Go To Page
8 ECE
Questions

Now In
9 Appln
Form

Thank you For Your Visit
Main Menu...

Google Search

Disclaimer and Copyright

Page-7 UPSC Calendar of Examinations

2009-05-22T00:35:00.000-07:00

UPSC For Beginner

Google Search

H
O
M
E

Go To Page
1 Welcome

Go To Page
4 Eligibility

Go To Page
5 OBC
Communities

Go To Page
6 IES
Syllabus

Now In
7 Calendar
of Exams

Go To Page
8 ECE
Questions

Go To Page
9 Appln
Form

A Sample Calendar of Examinations


	Sample Examination Date sheet

CALENDAR for EXAMINATIONS - 2009

Ser No	Name of Examination	Date of Notification (Saturday)	Last Date for Receipt of Applications See Note 2 Below	Date/Day of Commencement of Examination	Duration of Examination
4	Civil Services (Prel) Exam, 2009	06 Dec 2008	05 Jan 2009 (Monday)	17 May 2009 (Sunday)	1 Day
5	Engineering Services Exam 2009	10 Jan 2009	09 Feb 2009 (Monday)	06 Jun 2009 (Saturday)	3 Days
11	Civil Services (Main) Exam, 2009	--	--	23 Oct 2009 (Friday)	21 Days


	IES General Instructions

1. Candidates must use only the form supplied with the information Brochure purchased from any of the designated Head Post Offices/Post Offices listed in Appendix III. Form should be purchased from designated post offices only and not from any other agency. Candidates must use the form supplied with the Information Brochure only and they should in no case use photocopy/reproduction/unauthorisedly printed copy of the Form. The form will NOT be supplied by the Commission’s office.

2. The application form must be filled in by the candidates in their own handwriting. Since this form will be processed on computerised machines, candidates should exercise due care in handling and filling up the application form. They should use HB pencil only to darken the circles. For writing in the boxes, they should use blue or black pen.

Scince the entries made by the candidates by darkening the circles will be taken into account while processing the applications on computerised machines, they should make these entries very carefully and accurately. Entries in the boxes are meant for confirmatory purposes and these should also, therefore, be made correctly. There should be no variation between the entries made by the candidates by darkening the circles and those written in the accompanying boxes.

3. Candidates should ensure that the signatures appended by them in all the places viz. in their application form, Attendance List etc. and in all the correspondence with the Commission, should be identical and there should be no variation of any kind. If any variation is found in the signatures appended by him at different places, his candidature will be liable to be cancelled by the Commission.

4. No change in the entries made in original application form will be allowed under any circumstances.

5. The candidates are advised in their own interest to ensure that the applications reach the Commission’s Office on or before the closing date. Applications received in the Commission’s Office after the closing date will not be considered.

6. While filling in his application form, the candidate should carefully decide about his choice for the centre and engineering disciplines for the examination. More than one application from a candidate giving different centres and/or engineering disciplines will not be accepted in any case. Even if a candidate sends more than one completed application, the Commission will accept only one application at their discretion and the Commission’s decision in the matter shall be final.

7. On the Acknowledgement Card, the candidates should write their application form No. (as printed below the bar code on the form) and the name of examination viz. "Engineering Service Examination, 2009". They should also write clearly and legibly their mailing address on the Acknowledgement Card. A postage stamp of Rs. 6/- should be affixed on the card. The Acknowledgement Card should not be stapled or pinned or tagged or pasted with the Application Form.

PageTop

Eligibility Conditions (in brief)

(i) Age limits :

21-30 years as on 1.8.2009. (Upper age limit relaxable for SCs/Sts, OBCs and certain other categories as specified in Para 3(ii) of Notice).

(ii) Educational Qualifications :

Degree in Engineering or equivalent. M.Sc Degree or its equivalent with Wireless Communication, Electronics, Radio Physics or Radio Engineering as a special subject also acceptable for certain posts. (See Para 3(iii) of Notice).

(iii) Fee :

Rs. 100/- (Rupees one hundred only)

(No fee for SCs/STs/Physically Handicapped only).

(Ref. Para 4 of Notice).

Instructions to candidates for filling up the Application Form for the Engineering Service Examination, 2009.

Side 1 of Application Form

Column 1 : Examination for which applying

Darken the circle against "ENGG", in the box pertaining to Name of examination, write ENGG starting from the first box on the left. Also write 2009 in the boxes meant for year of examination.

Candidates are advised to ensure that the name of examination viz. ENGG is correctly written by them in the box. Any error in this regard may result in rejection of their application form.

Column 2 : Fee

If you have paid the requisite fee of Rs. 100/- (Rupees One hundred only), darken circle 1 and write 1 in the box; or

If you have not paid the fee and are claiming fee remission as SC, ST or Physically Handicapped, darken circle 2 and write 2 in the box.

N.B. : Fee is payable only in the form of Central Recruitment Fee Stamp, as per instructions against Column 12.

Column 3 : (I) Whether Physically Handicapped?

If you are not a physically handicapped person, darken circle 1 for No and write 1 in the box; or

If you are a physically handicapped person, darken circle 2 for yes and write 2 in the box.

(II) If yes, indicate category

Fill up this Column only if your answer to Column 3(I) is yes.

If you are Orthopaedically handicapped, darken circle 1 and write 1 in the box; or

If you are Blind, darken circle 2 and write 2 in the box; or

If you are Deaf-Mute, darken circle 3 and write 3 in the box.

Column 4 : Community

If you belong to SC, darken circle 1 and write 1 in the box; or

If you belong to ST, darken circle 2 and write 2 in the box; or

If you belong to OBC, darken circle 3 and write 3 in the box; or

If you belong to General Category (Others), darken circle 4 and write 4 in the box.

Note 1 : Candidates belonging to OBCs but coming in the Creamy Layer and thus not being entitled to OBC reservation should indicate their community as General Category (Others) Code No. 4".

Note 2 : Candidates belonging to neither SC, ST, nor OBC communities should write Code No. 4 (General Category) against the Column for Community and not leave it blank.

Note 3 : No change in the community status indicated by a candidate in his/her application form for the Examination will ordinarily be allowed by the Commission at a subsequent stage.

Column 5 : Sex

If you are Male, darken circle 1 and write 1 in the box; or

If you are Female, darken circle 2 and write 2 in the box;

Column 6 : Nationality

If you are an Indian national, darken circle 1 and write 1 in the box; or

If you are not an Indian national, darken circle 2 and write 2 in the box.

Column 7 : Name of the candidate

For filling up this column, first write in the boxes your full name (in English) in capital letters exactly as recorded in your Matriculation/High School/Secondary or equivalent examination certificate. Write a single letter in a box. Leave a box blank between any two parts of the name. Then darken the corresponding circle below each letter. Do not darken a circle below a blank box. Do not overshoot the boxes. Abbreviate name only if necessary. Do not use any prefix such as shri, Kum., Dr. etc with your name.

See sample filled up form in the information brochure for guidance.

Column 8 : Date of Birth

Darken the appropriate circles for the day, month and year of your birth as recorded in your Matriculation/High School/Secondary or equivalent examination certificate. Then write in the boxes using numerals 01 to 31 for day; numerals 01 to 12 for month and the last two digits for the year of birth.

Column 9 : Father’s Name

Write your father’s name (in English) in capital letters. Write a single letter in each box. Leave a box blank between any two parts of the name. Do not use any prefix such as Shri, Dr. etc.

Column 10 : Address

Write your complete mailing address including your name in English capital letters or Hindi within the box provided for the purpose. Also write the PIN Code therein. Write with blue or black ball pen only. Do not write outside the box. Please note that this address will be photocopied as such in all letters to be sent to you and therefore, it should be very clearly and legibly written.

If you make any mistake in writing the address, cover the whole box with an exact sized white paper slip and rewrite your address on that.

Column 11 : Photograph

Paste firmly in the space provided your recent photograph of 4 cm. x 5 cm. size (preferably in black & white). Do not staple the photograph. Photograph should neither be signed by you nor it should be got attested.

Column 12 : Space for CRF Stamp

Fee to be paid for the Engineering Service Examination is Rs. 100/- (Rupees One hundred only). SC/ST and Physically Handicapped candidates are not required to pay any fee. No fee exemption is however available to OBC candidates and they are required to pay the full prescribed full fee.

Fee is payable only through Central Recruitment Fee Stamp (Not postage stamps). No other mode of payment is acceptable. Obtain only one single CRF Stamp of Rs. 100/- denomination from the post office and paste it firmly within the box. After pasting the CRF Stamp on the form, get it cancelled from the post office of purchase in the space provided. Do not staple the CRF Stamp.

Side 2 of Application Form

Column 13 : (I) Are you residing in a remote area or abroad

If you are residing in a remote area specified in Para 6 of the Notice of the Examination or abroad, darken circle 1 against Yes and write 1 in the box; or

If you are not residing in a specified remote area/abroad, darken circle 2 against No and write 2 in the box.

N.B. : Candidates residing in a remote area specified in the Notice of the Examination or abroad are entitled to one week’s additional time for submission of application form.

(II) If yes, indicate area code :

Darken the appropriate circles for the area code as given below and then write the same code in the boxes.

AREA CODE FOR REMOTE AREAS AND ABROAD
Area	Code	Area	Code
Assam	01	Jammu & Kashmir	09
Meghalaya	02	Lahaul and Spiti District and Pangi Sub Division of Chamba District of Himachal Pradesh	10
Arunachal Pradesh	03
Mizoram	04
Manipur	05
Nagaland	06	Andaman & Nicobar Islands	11
Tripura	07	Lakshadweep	12
Sikkim	08	Abroad	13

Column 14 : Examination Centre Code

Choose the Examination Centre from the list given below where you wish to appear and see its code. Darken the appropriate circles and then write the same code in the boxes. Do not indicate more than one centre.

List of centres of Examination
Centre	Code	Centre	Code	Centre	Code
Agartala	45	Gangtok	42	Panaji ( Goa )	36
Ahmedabad	01	Hyderabad	10	Patna	15
Aizawl	47	Imphal	44	Port Blair	37
Aligarh	21	Itanagar	48	Raipur	49
Allahabad	02	Jaipur	11	Ranchi	41
Bangalore	03	Jammu	34	Sambalpur	53
Bareilly	54	Jorhat	46	Shillong	16
Bhopal	04	Kochi	24	Shimla	17
Chandigarh	35	Kohima	43	Srinagar	18
Chennai	12	Kolkata	06	Thiruvananthapuram	19
Cuttack	07	Lucknow	26	Tirupati	50
Dehradun	14	Madurai	40	Udaipur	52
Delhi	08	Mumbai	05	Vishakhapatnam	51
Dharwar	39	Nagpur	13
Dispur (Guwahati)	09

PageTop

Column 15 : Educational Qualification Code

Codes prescribed for educational qualification are as follows :

Code Educational qualification

01 If you have already passed the requisite qualifying Examination;

02 If you have appeared/appearing at the requisite qualifying Examination;

Choose the correct code applicable in your case and darken the appropriate circles. Write the same code in the boxes.

Column 16 : (I) Whether claiming age relaxation

If you are claiming age relaxation, darken circle 1 for Yes and write 1 in the box; or

If you are not claiming age relaxation, darken circle 2 for No and write 2 in the box.

(II) If Yes, indicate category code

Fill up this Column only if your response to Column 16(I) is Yes.

Darken the appropriate circles for category code given below and then write the same code in the boxes.

Category - Codes for Claiming Age Relaxation

(Refer Para 3(ii) (b)&(c) of Commission’s Notice published in the Employment News/Rozgar Samachar as amended)

PageTop

Code No.	Category			Extent of Age Relaxation Permissible
01	SC and ST			5 years
02	OBC			3 years
03	Certain categories of Departmentalal Government servants who are covered under Para 3(II) (b) of Commission’s Notice published in Employment News			5 years
04	Departmental Government Servants (as against Code No.03)	+ SC/ST		10 years
05	Departmental Government Servants (as against Code No.03)	+ OBC		8 years
06	Blind, deaf-mute and Orthopaedically handicapped persons.			10 years
07	Blind, deaf-mute and Orthopaedically handicapped persons	+ SC/ST		15 years
08	Blind, deaf-mute and Orthopaedically handicapped persons	+ OBC		13 years
09	Blind, deaf-mute and Orthopaedically handicapped persons		+Departmental Govt. Servants (as againstCode No. 03)	15 years
10	Blind, deaf-mute and Orthopaedically handicapped persons	+ SC/ST	+Departmental Govt. Servants (as against Code No. 03)	20 years
11	Blind, deaf-mute and Orthopaedically handicapped persons	+ OBC	+ Departmental Govt. Servants (as against Code No. 03)	18 years
12	Defence Services Personnel disabled in operations during hostilities with any foreign country or in a disturbed area and released as a consequence thereof.			3 years
13	Defence Services Personnel (as against Code No. 12)	+ SC/ST		8 years
14	Defence Services Personnel (as against Code No. 12)	+ OBC		6 years
15	Defence Services Personnel (as against Code No. 12)		+ Departmental Govt.Servants (as against Code No. 03)	8 years
16	Defence Services Personnel (as against Code No. 12)	+ SC/ST	+ Departmental Govt. Servants (as against Code No. 03)	13 years
17	Defence Services Personnel (as against Code No. 12)	+ OBC	+ Departmental Govt. Servants (as against Code No. 03)	11 years
18	Ex-Servicemen including Commissioned offices and ECOs/ SSCOs who have rendered at least five years Military Service as on 1st August, 2009 and have been released (i) on completion of assignment (including those whose assignment is due to be completed within one year from 1st August, 2009) otherwise than by way of dismissal or discharge on account of misconduct or inefficiency; or (ii) on account of physical disability attributable to Military Service; or (iii) on invalidment.			5 years
19	Ex-Servicemem including Commissioned Officers and ECOs/SSCOs (as against Code No. 18)	+ SC/ST		10 years
20	Ex-Servicemem including Commissioned Officers and ECOs/SSCOs (as against Code No. 18)	+ OBC		8 years
21	Ex-Servicemem including Commissioned Officers and ECOs/SSCOs (as against Code No. 18)		+ Departmental Govt. Servants (as against Code No. 03)	10 years
22	Ex-Servicemem including Commissioned Officers Servants and ECOs/SSCOs (as against Code No. 18)	+ SC/ST	+ Departmental Govt. (as against Code No. 03)	15 years
23	Ex-Servicemem including Commissioned Officers and ECOs/SSCOs (as against Code No. 18)	+ OBC	+ Departmental Govt. Servants (as against Code No. 03)	13 years
24	ECOs/SSCOs who have completed an initial period of assignment of five years of Military Service as on 1st August, 2009 and whose assignment has been extended beyond five years and in whose case the Ministry of Defence issues a certificate that they can apply for civil employment and that they will be released on three months notice on selection from the date of receipt of offer of appointment.			5 years
25	ECOs/SSCOs (as against Code No. 24)	+ SC/ST		10 years
26	ECOs/SSCOs (as against Code No. 24)	+ OBC		8 years
27	ECOs/SSCOs (as against Code No. 24)		+ Departmental Govt. Servants (as against Code No. 03)	10 years
28	ECOs/SSCOs (as against Code No. 24)	+ SC/ST	+ Departmental Govt. Servants (as against Code No. 03)	15 years
29	ECOs/SSCOs (as against Code No. 24)	+ OBC	+Departmental Govt. Servants (as against Code No. 03)	13 years
30	Candidates who had ordinarily been domiciled in the State of Jammu & Kashmir during the period from 1st January, 1980 to 31st December, 1989			5 years
31	Candidates who had ordinarily been domiciled in the State of J & K (as against Code No. 30)	+ SC/ST		10 years
32	Candidates who had ordinarily been domiciled in the State of J & K (as against Code No. 30)	+ OBC		8 years
33	Candidates who had ordinarily been domiciled in the State of J & K (as against Code No. 30)		+ Departmental Govt. Servants (as against Code No. 03)	10 years
34	Candidates who had ordinarily been domiciled in the State of J & K (as against Code No. 30)	+ ST/CT	+ Departmental Govt. Servants (as against Code No. 03)	15 years
35	Candidates who had ordinarily been domiciled in the State of J & K (as against Code No. 30)	+ OBC	+ Departmental Govt.Servants (as against Code No. 03)	13 years

PageTop

Columns 17 to 20 :

Candidates applying for the Engineering Service Examination are not required to fill any of these columns. They should therefore, leave these columns blank.

Columns 21 : Engineering Services Examination

Darken circle against the branch of Engineering (i.e. Civil, Mechanical, Electrical or Electronics & Telecommunication Engineering) for which you wish to compete at the examination (only one Branch of Engineering to be specified) and write the appropriate code in the box.

Columns 22 :

Candidates appearing for the Engineering Services Examination are not required to fill this column. They should, therefore, leave this Column blank.

Column 23 : Declaration

The candidate must read the declaration carefully before signing. In Sub-para (i), the candidates must fill up the Examination Notice number viz. 05/2009-ENGG and date of publication of Notice in Employment News/Rozgar Samachar viz., 10.01.2009 in the spaces provided before the asterisk marks.

Column 24 : Signature of candidate

Make your usual signature in blue or black ball pen within the box provided. Your signature must not overflow or touch the border of the box provided. Do not merely write your name in capital letters in place of signature. Unsigned applications will be rejected.

Also write the place and date of signing the form in the spaces provided for the purpose.

Verify the following before mailing the application

1. That you have used the application form purchased from the designated Head Post Offices/Post Offices only.

2. That you have filled in all the relevant columns of the application form by blackening the appropriate circles and also writing the corresponding code(s) in boxes. It may be carefully checked that there is no variation between the entries made by you by darkening the circles and those written in the accompanying boxes.

3. That you have affixed your recent photograph preferable in Black and White (unsigned and unattested) in column 11 of the application form.

4. That in case you are required to pay fee, you have affixed a Central Recruitment Fee Stamp of Rs. 100/- denomination in column 12 of the application form and have got it cancelled from the Post Office.

5. That you have signed in column 24 of the application form.

6. That only one application form and one acknowledgement card is being mailed in the envelope supplied to you with the Brochure and no other enclosure is attached therewith.

7. That you have written the name of examination viz., "Engineering Service Examination, 2009" on the envelope meant for despatch of application form and acknowledgement card.

H
O
M
E

Go To Page
1 Welcome

Go To Page
4 Eligibility

Go To Page
5 OBC
Communities

Go To Page
6 IES
Syllabus

Now In
7 Calendar
of Exams

Go To Page
8 ECE
Questions

Go To Page
9 Appln
Form

Thank you For Your Visit
Main Menu...

Google Search

Disclaimer and Copyright

Page 8 IES Previous Year Question Papers

2009-05-22T00:33:00.000-07:00

UPSC For Beginner

Google Search

H
O
M
E

Go To Page
1 Welcome

Go To Page
4 Eligibility

Go To Page
5 OBC
Communities

Go To Page
6 IES
Syllabus

Go To Page
7 Calendar
of Exams

Now In
8 ECE
Questions

Go To Page
9 Appln
Form

UPSC(Elec. & Telecom) Previous year Questions


	QN-1 .UPSC IES Electronics & Telecommunications - Previous Year Questions

Consider the following statements:
The 555 timer can be employed in
1. a monostable multivibrator
2. a bistable multivibrator
3. an astable multivibrator
Of the statements
a) 1 and 2 are correct

b) 1 and 3 are correct

c) 2 and 3 are correct

d) 1, 2 and 3 are correct


	QN-2 .UPSC IES Electronics & Telecommunications - Previous Year Questions

Consider the following statements:
A clamper circuit
1. adds or subtracts a dc voltage to or from a waveform
2. does not change the shape of the waveform
3. amplifies the waveform
a) 1 and 2 are correct

b) 1 and 3 are correct
c) 2 and 3 are correct

d) 1, 2 and 3 are correct


	QN-3 .UPSC IES Electronics & Telecommunications - Previous Year Questions

Consider the following statements:
Monolithic regulators can be used to
1. realize a constant voltage regulator
2. realize a constant current regulator
3. introduce flexibility in setting output voltage level.
Of these statements
a) 1 and 2 are correct

b) 1 and 3 are correct
c) 2 and 3 are correct

d) 1 , 2 and 3 ae correct


	QN-4 .UPSC IES Electronics & Telecommunications - Previous Year Questions

A 24 V, 600 mW Zener diode is be used for providing a 24V stabilitzed supply to a variable load. Assume that for proper Zener action, a minimum of 10mA must flow through the Zener. If the a) input voltage is 32V, what would be the value of R and the maximum load current?
a) 320 ohm, 10 mA
b) 400 ohm, 15 mA
c) 400 ohm, 10 mA
d) 320 ohm, 15 mA


	QN-5 .UPSC IES Electronics & Telecommunications - Previous Year Questions

Match the following:

A. Darlington amplifier 1. Low input impedance
B. Cascade amplifier (FET) 2. Low output impedance
C. Common gate amplifier 3. Low input capacitance but high Rin
D. Differential amplifier 4. Large common mode rejection


	QN-6 .UPSC IES Electronics & Telecommunications - Previous Year Questions

Match the following:

A. Class A single ended 1. Requires PNP & NPN transistor pairs
B. Class B pushpull transformer coupled 2. Prevents cross-over distortion
C. Class AB push-pull 3. Has maximum efficiency amongst these amplifiers
D. Class AB complementary symmetry 4. Has minimum efficiency amongst these amplifiers


	QN-7.UPSC IES Electronics & Telecommunications - Previous Year Questions

Match the following:

A. RC coupling 1. Higher voltage gain and impedance matching
B. Inductive coupling 2. Ability to amplify dc and low frequency signals
C. Transformer coupling 3. Minimum possible non-linear distortion
D. Direct coupling 4. Low collector supply voltage can be used


	QN-8.UPSC IES Electronics & Telecommunications - Previous Year Questions

Consider the following statements:
> Stagger tuning is used
> 1. to obtain sharp fall in the frequency response
> 2. to obtain a wider pass band
> 3. in the IF amplifiers of radio receivers
> Of these statements:
> a) 1 alone is correct
> b) 1 and 3 are correct
> c) 2 alone is correct
> d) 1, 2 and 3 are correct
>


	QN-9.UPSC IES Electronics & Telecommunications - Previous Year Questions

A composite voltage v = 10 sin 100 t + 10 cos 100 t is applied across a series combination of a capacitor of 1µF and a resistance of 10K?/ The average power dissipated in the resistance is
> a) 5mW
> b) 3.5 mW
> c) 2.5 mW
> d) 1.25 mW


	Civil service or Engg Service?

Even though you are an Engineering Graduate, it is NOT necessary that you should choose only Engineering Service. You can write Civil Service also.

H
O
M
E

Go To Page
1 Welcome

Go To Page
4 Eligibility

Go To Page
5 OBC
Communities

Go To Page
6 IES
Syllabus

Go To Page
7 Calendar
of Exams

Now In
8 ECE
Questions

Go To Page
9 Appln
Form

Thank you For Your Visit
Main Menu...

Google Search

Disclaimer and Copyright

Page 1 UPSC For Beginner

2009-05-22T00:29:00.000-07:00

UPSC For Beginner

Google Search

H
O
M
E

Now In
1 Welcome

Go To Page
4 Eligibility

Go To Page
5 OBC
Communities

Go To Page
6 IES
Syllabus

Go To Page
7 Calendar
of Exams

Go To Page
8 ECE
Questions

Go To Page
9 Appln
Form

Go To Page
10 Maths
Syllabus

UPSC For Beginner


	1-1 Jump Start


	1-2 : Choose ONE OUT OF FOUR : Syllabus

There are FOUR different syllabus You have to choose ONE among them.

1. Indian Civil Services Syllabus (IAS )

2. Indian Engineering Services ( IES)

3. Indian Forest Services Syllabus(IFS)

4. Indian Economic Service / Indian Statistical Service Syllabus(IES / ISS)


	1-3 : Watch for Civil Service Exam Notification

For Civil Service Exam ( ie. IAS, IPS, etc), Applications are called for during

November/December

Preliminary Exam will be conducted in May and Main exam will be after 5 months of Preliminary Exam.


	1-4 : Watch for Engg Service Notification

For Engg Service Exam, Apllications are called for in the month :

January/February.

Preliminary Exams will be conducted in May and Main exam will be in June/july


	1-4 : Eligibililty

Eligibility to write Civil Service :

Any degree such as BA,BSc,MA,MSc,BTech,BE,MBBS

Age : Between 21 to 30.

Eligibility to write Engineering Service(IES):

Any Engineering Degree (some of the MSc degree also eligible)

Age : Between 21 to 30.

For complete eligibility condition and age relaxation click on the ELIGIBILITY link given at the top of this page


	Where you will be posted?

Those who passed IES under Electronics and Telecom Engg Category will be posted in one of these:


	1-5 : Mark Distribution for Civil Service

Notiificatiaon:Nov/Dec, Exam:May

Civil Service (preliminary)

CS (Main)

Total Marks for Written Examination 2000 Marks
Interview Test 300 Marks
Grand Total 2300 Marks

Exam will be in October or November .


	Why dont you try Civil Service Instead of Engg Service?

Even though you are an Engineering Graduate, you are eligible for appearing CIVIL SERVICE also.

For an example I have given HERE a complete syllabus for UPSC > Civil Service > Maths

For syllabus and Marks Distribution for Engineering Service,

please CLICK HERE


	1-7 : UPSC FAQ

Some UPSC FAQ

Civil Service Examination

Q.1. Can a candidate choose an optional subject, which he has not studied at graduate/PG level?
Ans. Yes.

Q.2. Is it necessary for a candidate to take the same optional subject in the Main Exam, which he had taken in the prelims Examination?
Ans. No.

H
O
M
E

Now In
1 Welcome

Go To Page
4 Eligibility

Go To Page
5 OBC
Communities

Go To Page
6 IES
Syllabus

Go To Page
7 Calendar
of Exams

Go To Page
8 ECE
Questions

Go To Page
9 Appln
Form

Go To Page
10 Maths
Syllabus

Thank you For Your Visit
Main Menu...

Google Search